faleslogo2.jpg

86 Finnell Dr. Unit 6
Weymouth, Ma. 02188
Phone: 781-331-8440
Outside MA:  800-245-7250
FAX: 781-331-8870
E-Mail: mathcorp1@aol.com

fpic2.jpg

GENERAL SPECIFICATIONS:
· Available widths between side frames:
  60", 84", 100" (Other widths are special).
· Length of stitch: 5 to 7 per inch.
· Type of stitch: Double thread chainstitch
  (Fed. Spec. stitch type 401).
· Material thickness: Maximum of 1/4" in
  a compressed state.
· Needle Stroke: 1-3/4".



· Needle spacing: 1/4" minimum.
· Minimum spacing between end needle  
  positions of adjacent needle sections is 1/2". 
  (A distance of 1" is necessary between needle
  sections having a conveyor chain.)
· Ruggedly constructed for speeds up to
  1000 stitches per minute.
· Special Specifications are available.

ACCESSORIES:
· Pin-type continuous chain conveyor and
  conveyor table for conveying materials either
  in roll form or as individual pieces into the
  sewing machine.
· Variable speed drive units and electric 
  controls  and switches.
· Special pleat fullness devices.
FALES design slitter or router for slitting or
   routing filler padding materials as used in the
   automotive industry.
· Unwind stands.
· Manual and automatic cut off equipment used
  at the delivery end of the machine.
· Stock tables, platforms and special feed 
  systems.


 

                                    ©2004 Mathewson Corporation- All Rights Reserved